This "build-to-order" Shuntec-P06 PRO 4-post servo-hydraulic electric heated platen press 300 ton is recently designed and built for a customer from the USA. The application of the press is for hot forming brake pads for cars. With the built-in load cell, position transducer, and 10-inch HMI, the press brings our client the ability of precise closed-loop control for pressing force and position. The bottom and top heated platen is electric heating, with a maximum temperature of 300 degrees centigrade. All parameters of the 300 ton heated platen press including tonnage, stroke, daylight, and bed sizes can be customized to best meet your requirements.
Custom Features of 300 Ton 4-Post Servo-Hydraulic Electric Heated Platen Press
- The top-mounted servo-hydraulic system, a compact design with less footprint occupied
- 60% lower energy consumption
- Heavy welded and rib-reinforced steel frame to ensure maximum rigidity and minimum deflection
- Four-sided access to the working area, easy for mold/die loading and maintenance, as well as parts removal
- Required cylinder stroke 380 mm;
- Required maximum daylight 480 mm
- Heated platens size 1016*1016 mm, flat throughout the platen
- The heating method of the heated platen: electric heating, with Omron temperature controller; Maximum heating temperature 300℃
- Bedtable height 915 mm above the floor
- Calculated ram speed: Approach 15 mm/s; Pressing 2.5 mm/s; Return 17.5 mm/s
- Siemens PLC control
- Siemens 10-inch HMI, easy for setting up the technical parameters and recipes for different products
- Double start buttons on the front and rear operating side
- Emergency stop button on the front operating side
- Safety mesh shields on the left & right sides
- Safety light curtains guarding the front and rear opening of the press
- Dual channel safety relay circuit for the safety light curtains
- Pneumatic safety ratchet bar to prevent the sudden fall of the slider
